Name: Actek 1/2"-13 x 0.78" UNC Swivel Hoist Ring - 2500 lbs WLL
SKU: OKF3424575270
Availability: InStock

No products in the cart.

Actek 1/2″-13 x 0.78″ UNC Swivel Hoist Ring – 2500 lbs WLL

Home
Actek 1/2″-13 x 0.78″ UNC Swivel Hoist Ring – 2500 lbs WLL

Actek 1/2″-13 x 0.78″ UNC Swivel Hoist Ring – 2500 lbs WLL

In Actek Safety Swivel Hoist Rings

~~$124.99~~ $62.50

SKU: OKF3424575270

Availability: In stock

Actek Safety Swivel Hoist Rings UNC Thread SeriesActek Safety Swivel Hoist Rings are high-strength, American-made points engineered for safe, reliable overhead . Built from certified alloy steel and proof-tested to 200% of rated capacity, these hoist rings deliver unmatched performance and traceable safety. Each unit swivels a full 360 and pivots 180, ensuring proper load alignment and preventing side-loading stress.Key FeaturesMade in the USA manufactured by Actek Manufacturing & Engineering, an industry leader in precision hardware.200% proof-load tested and serialized each hoist ring is individually tested and marked for complete traceability.360 swivel / 180 pivot provides smooth load rotation and alignment without inducing bolt torque.Alloy steel construction heat-treated, magnetic particle inspected, and certified for maximum strength and fatigue resistance.5:1 design factor meets or exceeds ASME B30.26 and CE requirements for safety and performance.Rated 100% from 090 maintains full working load limit even during angular lifts.Fatigue tested proven through 20,000 cycles at 1 the rated load.Durable finish standard black oxide coating; optional cadmium, zinc, or electroless nickel plating available.Readily available most popular sizes are in stock for quick shipment at competitive prices.Capacity & Size RangeAvailable in standard UNC thread sizes from 1/4″-20 through 2-1/2″-8, with working load limits ranging from 600 lbs up to 50,000 lbs. Larger sizesrated up to 250,000 lbsare available by special order.Typical ApplicationsMachinery and rigging pointsTooling, die, and mold handlingConstruction and fabrication workHeavy equipment assembly and transportSafety & Installation GuidelinesNever exceed the rated load capacity. The 5:1 safety factor is designed to protect against accidental misuse and dynamic forces.Always tighten to the recommended torque values and check periodicallybolts can loosen over time under vibration or repeated use.Ensure full material strength. The parent material should have a tensile strength of at least 80,000 PSI. For softer materials, consider a through-hole mount with a backing nut and washer.Avoid shock loading. Always lift gradually; sudden or impact loads can cause serious damage and require reinspection before reuse.Verify free movement. Make sure the hoist ring can pivot and rotate freely in all directions before each lift.Understand load distribution. Load on each hoist ring may exceed total weight divided by the number of ringsespecially at shallow angles or uneven loads.Note: Regular inspection and proper installation are critical to safe operation. If shock loading or deformation is suspected, discontinue use and perform magnetic particle (Magnaflux) testing before returning the hoist ring to service.